Download Amlogic USB Burning Tool

1. Guide to Flash Firmware Using the Amlogic Burn Card Maker Download the Amlogic Burn Card Maker from the download section above. Extract the archive and run the BurnCardMaker.exe file to run the tool. Click on the upper left Chinese menu and choose the second option, check ‘English Version’, You have to restart the application.
2. Amlogic USB Burning Tool V3.1.0 September 2020 1 minute read Amlogic Burning Tool is compatible with all versions of Windows OS, including Windows XP to Windows 10 (both 32 and 64 bit).

Download Amlogic USB Burning Tool

Download Amlogic USB burning tool from here, install it on your Windows computer and flash stock firmware on your Android device powered by Amlogic chipset.

Here is the download link for the Amlogic USB Burning Tool.

You May Also Like,

• Download Rockchip Batch Flash Tool
• Download Intel Phone Flash Tool

How To Flash/Upgrade Firmware on Android TV Box Using Amlogiv USB Burning Tool

Now let's look at the exact steps that you have to follow to flash the firmware image file on your Android TV Box. Before installation, you have to keep in mind some guidelines.

Pre-Requisites

• Make sure that Android TV box is connected to your PC
• Power on The TV should with the power adapter
• This USB tool only supports on Windows PC

Installation Guide

Step-1 Download the Amlogic USB tool zip file and extract it to the PC.

Step-2 In the folder you have the InstallDriver.exe. This will install the required drivers for Amlogic TV boxes.

Step-3 First, connect your device to the PC then click the Driver Installation wizard.

Amlogic Usb Burning Tool V2.0.8

Step-4 Open the folder “USB_Burning_Tool” >> then click the “USB_Burning_Tool.exe” to start the USB burning tool.

Step-5 Once the setup wizard opens click yes to all the options.

Step-6 Click the second option on the top bar to reveal the option for changing the language.

Step-7 you have to put your device into recovery mode. This is differently done on all TV boxes. Some have little reset holes and some have buttons on the bottom of your device.

Step-8 connect your Android TV box to your PC when it’s in recovery mode in order to upgrade your firmware. If done correctly you will have a connect success like in the image below.

Step-9 Now, click on the File option and browse to find your firmware .img file.

Step-10 Make sure to untick the overwrite key box.

Step-11 Click Start to begin the firmware upgrade process.

Amlogic Usb Burning Tool Key File Configuration Wrong

Step-12 Wait for a while the firmware upgradation is taking place. After it finishes click on Stop.

Amlogic Usb Burning Tool Windows 10

So, that's it, guys. Now the firmware on your Android TV Box is updated. We hope this guide about Amlogic USB Burning tool was helpful to you. if you have any queries do let us know in the comments.